- Offers a wide range of Data sources
- Optimal visual quality
- Flexible alarms with customizable RGB shift lights and digital output
- Dimensions: 169.4*97*23 mm
Read more >
MXS 1.2/1.3 Strada
The MXS 1.2/1.3 Strada exists in two versions, Standard and Street Icons.
The MXS 1.2/1.3 Strada is an advanced version of MXS Strada that provides a wide range of data sources. This 5-inch colour display can be customized to display lap times, as well as all the information from the Engine Control Unit, analogue/digital inputs, pre-defined math channels, and the optional GPS09 Module.
The MXS 1.2/1.3 Strada comes with a CAN output feature that allows users to send messages directly to an existing CAN network, expanding the range of vehicle control possibilities.
The MXS 1.2/1.3 Strada displays all necessary data on pre-configured pages, including speed, water temperature, oil pressure, and lap times. Users can choose from a wide variety of page styles, defining which data to be shown, their end of the scale, and measure units. It is easy to swap between pages using push buttons.
The MXS 1.2/1.3 Strada features a high-contrast TFT display that provides optimal visual quality. The ambient light sensor ensures the backlight is always at the best brightness levels. The dash is available in the "Street Icons" version, displaying fuel, oil, water temperature, and more.
The MXS 1.2/1.3 Strada offers ten customizable RGB shift lights that can be tailored to define the RPM threshold for every single gear. The RGB alarm LEDs can be configured to turn on/off based on analog or digital inputs, ECU values, expansion values, math channels, or GPS information. Users can select a solid alarm or flashing one and set the flashing frequency. Additionally, users can configure accompanying text messages and set alarm priorities.
MXS 1.2/1.3 Strada features a LOW SIDE type digital output that can be configured to automatically run external systems. The system can be activated or deactivated based on the value of the analog/digital inputs or impulses from the ECU. This feature allows users to switch on/off additional lights, activate/deactivate a cooling fan or circulation pumps, etc., when certain events happen.
Camera inputs also for mirror camera:
To swap your display into a mirror camera, two analogue camera inputs are available, through a pushbutton command or event management.
Display | 5” TFT |
Resolution | 800x480 pixels |
Contrast | 600:1 |
Brightness | 700cd/m2 - 1,100 Lumen |
Ambient light sensor | Yes |
Alarm LEDs | 6 RGB freely configurable |
Shift lights | 10 integrated freely configurable RGB LEDs |
CAN connections | 2 |
ECU connections | CAN, RS232 or K-Line |
ECU compatibility | + 1,000 industry leading ECUs |
Expansion CAN connection | GPS, Channel Expansion, TC Hub, Lambda Controller, SmartyCam HD |
Analog inputs | 8 fully configurable, max 500 Hz each |
Digital inputs | 1 speed input, coil RPM input |
Digital outputs | 1 (1 A max) |
Second CAN | Yes |
Body | Anodized Aluminum |
Pushbuttons | Metallic |
Connectors | 2 AMP connectors + 1 Binder connector |
Power consumption | 400 mA |
Dimensions | 169.4x97x23 mm |
Weight | 480 g |
Waterproof | IP65 |
IN THE BOX
MXS 1.2 Strada or MXS 1.3 Strada, USB cable, 14 pins standard wiring, User manual & Race Studio 3 software freely downloadable from AiM web site.
Documentation
MXS 1.2 Strada Technical sheet
- Supplier reference
- XA3MXSST12A010, XA3MXSST12A020, XA3MXSST12I010, XA3MXSST12I020
XA3MXSST12A010
No reviews
Related products