Solo 2 DL
ECU connection through CAN/RS232 External Power Cable or CAN/K-Line OBD2 Connector
More than 1,000 protocols for 1,000+ ECU in the database, for easily connect your Solo 2 DL to your Engine Control Unit and get a lot of information with just one cable.
In case your ECU protocol is not in the database, no problem: an ECU Driver Builder is always available in the Race Studio 3 configuration software, and you will be able to create your protocol by yourself.
Coil RPM input through RPM External Power Cable
Solo 2 DL now features a digital input allowing to log RPM either from square wave signals (8-50 V signal) or pulse signals (150-450 V ignition coil trigger - primary circuit).
Solo 2 DL, power cable with AC adapter, mounting bracket with screws, user manual & Race Studio 3 software freely downloadable from AiM web site, AiM sticker.
Concerning the cables you can choose among:
CAN/K-Line/External power cable with OBDII connector
CAN/RS232 external power cable
RPM/External power cable (if your vehicle has no ECU)
Why Solo 2DL? Because it features:
-ECU connection
-Up to 8 configurable display pages
This in addition to all Solo 2 features, to say:
-Integrated GPS + Glonass receiver , a huge tracks database that Solo 2 DL manages to automatically select the track you are racing on, a powerful and comfortable Wi-Fi connection, different type of races: speed and performance , 10 RGB LEDs that clearly show if you are improving or not , a huge amount of internal memory (4 Gb) capable of recording a lot of tests
What about ECU connection?
Solo 2 DL manages all the hardware ECU connections as well as all the communication lines: CAN, K-Line, RS232. Its huge database includes more than 1500 protocols you can load in your Solo 2 DL
If the vehicle does not have an ECU?
In case your vehicle does not have an ECU, you can anyway connect Solo 2 DL to an RPM wave to synchronize RPM to the position on the track thanks to the RPM power cable.
Anything else?
Of course yes: Solo2 DL can receive up to 10 configurations
Display-Graphical
Display resolution-238x99 pixels
Display pages-Up to 8 freely configurable
Backlight- 7 configurable RGB colors
Shift lights/alarm LEDs-10 configurable RGB LEDs
Integrated track database-Yes
Inertial platform-Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer
WiFi connection-Yes
GPS-10 Hz
ECU connection-CAN, RS232 or K-Line to 1,000+ industry leading ECUs
External power -2V
Connectors-1socket (binder) 712, 5-pins 1socket (binder) 712, 8-pins
Memory-4 Gb
Battery type-Rechargeable lithium
Pushbuttons-Metallic
Dimensions-98.0 x 73.7 x 30.2 mm
Weight-240 g, battery included
Waterproof-IP67
You might also like
