MXS 1.2/1.3, the evolution of MXS, is the dashlogger designed to acquire and display data coming from your ECU, as well as from the GPS09 Module included in the kit, analog/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 5" display has been specifically designed for small cockpits installation. See the full presentation.
CAN output
With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.
Freely configurable pages
You can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units.
Swapping between pages can be managed pushing one or two pushbuttons.
High contrast TFT display
A high contrast TFT display identifies MXS 1.2/1.3 at the first glance.
An ambient light sensor keeps the backlight at optimum brightness levels.
Flexible alarms
MXS 1.2/1.3 features six configurable RGB alarm LEDs: you choose the conditions, you choose the colors.
Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities.
Two digital outputs
MXS 1.2/1.3 features two digital outputs.
The two digital outputs (Dout) are LOW SIDE type (switch to ground): they can be configured in order to be turned on/off depending on the value
of the analog or digital inputs.
They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when
a certain event happens.
Integrated shift light array
Choose from a host of advanced multicoloured RGB shift light patterns that can be customized as you like, and for each unique gear when required.
Connection example
These are only some of the items that can be added to our MXS 1.2/1.3 for incrementing the performance and the data acquired:
Technical specifications
Display | 5” TFT |
Resolution | 800x480 pixels |
Contrast | 600:1 |
Brightness | 700cd/m2 - 1,100 Lumen |
Ambient light sensor | Yes |
Alarm LEDs | 6 RGB freely configurable |
Shift lights | 10 integrated freely configurable RGB LEDs |
CAN connections | 3 |
ECU connections | CAN, RS232 or K-Line |
ECU compatibility | + 1,000 industry leading ECUs |
Expansion CAN connection | GPS, Channel Expansion, Thermocouple Expansions, Lambda Controller, SmartyCam HD |
Analog inputs | 8 fully configurable, max 500 Hz each |
Digital inputs | 4 Speed inputs, lap signal, coil RPM input |
Digital outputs | 2 (1 A max each) |
Second CAN | Yes |
Wi-Fi connection | Yes |
Internal memory | 4 GB |
Body | Anodized Aluminum |
Pushbuttons | Metallic |
Connectors | 2 Motorsport connectors + 1 Binder connector |
Power consumption | 400 mA |
Dimensions | 169.4x97x23 mm |
Weight | 530 g |
Waterproof | IP65 |
In the box
MXS 1.2 or MXS 1.3, 37 pins standard harness, GPS Module with cable, USB cable, User guide & Race Studio 3 software freely downloadable from AiM web site.
Documentation
- Supplier reference
- XA2MXS12A20R1, XA2MXS12A40G1, XA2MXS12A40R1, XA2MXS12A13G1
No reviews
Related products